Analog and Digital Trainer Basic Electricity Trainer Circuit Experiment Kit Electronics Training

• Customization: Available
• Condition: New
• Customized: Customized
• Model NO.: GC-MNSZ01/BJ
• Type: Model
• Transport Package: Plywood or Carton
• Trademark: GeeChin
• Origin: China
• HS Code: 9023000000
• Production Capacity: 200

Product Description

EQUIPMENTOVERVIEW

• The Analog and Digital Trainer consists of removable solderless breadboard, DC power supplies, signalsources, displays, switches and speaker etc.
• The Analog and Digital Trainer should be an off the shelf device.
• All connectors should be replaceable and easy to maintain.
• It is an educational training kit that can be used to conduct both analog and digital experiments without the use of additional equipment.

EXPERIMENTS

1. Solderless Breadboard:
   • Nickel plated contact tie points: 2800 tie points or more
   • Removable/Detachable solderless breadboard
   • Fitted all DIP sizes, all components with leads and solid wires AWG#22-30 (0.3mm to 0.8mm) or better
2. DC Power Supplies:
   • Fixed DC output: +5V, 1A or higher
   • Fixed DC output: -5V, 1A or higher
   • Variable DC output: 0V to +15V, 1A or higher
   • Variable DC output: 0V to -15V, 1A or higher
   • All supplies are short circuit protected
3. Function Generator:
   • Types of waveform: Sine, Square and Triangle
   • Frequency: 1Hz to 100kHz or higher (adjustable in 4 or more ranges)
   • Adjustable output amplitude: 0 to 10Vp-p or higher
   • TTL output
4. Data Switches: Toggle data switches and corresponding output points: 16 or more.When the data switch is set to '0' position, the output is LO level and when it is set to '1' position, the output is HI level
5. Pulse Switches (A, A, B, B):
   • Push button pulse switches: 2 or more.
   • Each push button switch should eliminate the bounces caused by switching from open to close or viceversa
6. LED Displays:
   • LED displays and corresponding input terminals: 16 or more
   • The LEDs will turn on when its input is at HI level and it will turn off when its input is at LO level.
7. 7-Segment Displays: 2 digits or more
8. Audio Speaker: 8 ohms, 0.25W or higher
9. Potentiometers:
   • Variable Resistor: 1 kohm or better
   • Variable Resistor: 100 kohm or better
10. Power Supply: 230V, 50Hz or equivalent to local standards
11. Accessories:
    • Power cord: 230V, 50Hz, Singapore standard 3-pins plug
    • Jumper wires
    • User Manual